Flyron Technology Co., Ltd.
FN-AL7T Triggerable MP3 Sound Player
E-mail: [email protected]
2
3. Operation Guide
3.1. Set Work Mode
There are 4 trigger modes available for users to set in a configuration file according to the actual needs. Each of the parameters
from “0” to “3” represents a corresponding work mode, which an be set individually for each of the 7 trigger inputs. See the details
below.
Detailed Explanations
Pulse Interruptible: In this mode, a single negative pulse will start playback
.
It is possible to interrupt the
playback by pressing the same button used to activate. Once playback is interrupted, it will
automatically restart the audio file immediately. It’s also possible to interrupt the play back by pressing
any of the other 3 buttons. Once playback is interrupted, it will automatically start the sound that is
associated with the button pressed.
Hold and Play in Loop: In this mode, the negative pulse must be held/maintained to the sound module
trigger for audio file to complete. The audio file will only playback while button, or negative pulse, is
held/maintained during playback. Once the button being held, or negative pulse, is removed, the
playback will be stopped/cancelled. Once the button is kept holding, when the playback of the audio file
is finished, it will start to play it repeatedly(loop playback).
Parameter
Corresponding Trigger Mode
0
Pulse Interruptible
1
Hold and Play in Loop
2
Pulse Non-interruptible
3
All in Loop