9
Fault Finding Chart
FAULT
CHECK
ACTION
Unit fails to
operate.
1. Switch in the
OFF
position.
2. Mains cable disconnected
from electricity supply.
3. Circuit breaker tripped, or
fuse blown.
4. Mechanical failure.
1. Slide switch to
ON
position.
2. Reconnect cable.
3. Reset circuit breaker or
fuse.
4. Contact your local Electrolux
Outdoor Products Approved
Service Centre.
Unit
vibrates
abnormally.
1. Debris hung on impeller.
2. Mechanical failure.
1. Clean unit. Remove any
debris.
2. Contact your local Electrolux
Outdoor Products Approved
Service Centre.
Impeller
will not turn
freely.
1. Debris in air intake area or
hung on impeller.
2. Mechanical failure.
1. Clean unit. Remove any
debris.
2. Contact your local Electrolux
Outdoor Products Approved
Service Centre.
WARNING:
Always stop the unit and disconnect the mains electricity sup-
ply before performing all of the recommended remedies below except reme-
dies that require unit to be operating.
Environmental Information
Electrolux Outdoor Products are manufactured under an Environmental Manage-
ment System (ISO 14001) using,where practical,components manufactured in the
most environmentally responsible manner, according to company procedures,and
with the potential for recycling at the end of the products’ life. Packaging is recy-
clable and plastic components have been labelled (where practical) for catego-
rised recycling.
S
Awareness of the environment must be considered when disposing of
‘end--of--life’ product.
S
If necessary, contact your local authority for disposal information.
Service Recommendations
S
Your product is uniquely identified by a product rating label.
S
We strongly recommend that your product is serviced at least every twelve
months.
