ENGLISH - 4
Removing and Fitting the Blade and Fan
P1 - Blade bolt
P2 - Blade
P3 - Fan
•
Always handle the blade with care - sharp
edges could cause injury.
•
USE GLOVES.
Removing the Blade and Fan
1.
To remove the blade bolt, hold the fan firmly
and with the spanner provided loosen the
blade bolt by turning it anti-clockwise
(P)
.
2.
Remove the blade bolt, blade and fan.
(P)
3.
Inspect for damage and clean as necessary.
•
Renew your metal blade after 50 hours
mowing or 2 years whichever is the
sooner - regardless of condition.
•
If the blade is cracked or damaged
replace it with a new one.
•
Never use a blade bolt if the insulated
head is damaged cracked or missing.
Fitting the Blade and Fan
1.
Ensure the fan is located correctly.
(P)
2.
Fit the blade to the fan with the sharp edges
of the blade pointing away from the fan.
3.
Re-assemble blade bolt through blade and
fan.
4.
Hold the fan firmly and tighten blade bolt
firmly with the spanner provided. Do not
over tighten.
5.
Do not use a longer spanner.
Caring for your Lawnmower
Cleaning (Q)
•
USE GLOVES
•
IMPORTANT
It is very important that you keep your
lawnmower clean. Grass clippings left in
any of the air intakes or under the deck
could become a potential fire hazard.
1.
Remove grass from under the deck with
brush.
2.
Using a soft brush - remove grass clippings
from all air intakes, the discharge chute and
the grass box.
3.
Remove the blade,
see Figure P
, to gain
access to the fan and clean with a soft
brush.
4.
Wipe over the surface of your lawnmower
with a dry cloth.
•
IMPORTANT
Never use water for cleaning your
lawnmower. Do not clean with chemicals,
including petrol, or solvents - some can
destroy critical plastic parts.
At the End of the Mowing Season
1.
Replace blade, bolts, nuts or screws, if
necessary.
2.
Clean your lawnmower thoroughly.
3.
Make sure that the electric cable is coiled
properly.
Storing your Lawnmower (R)
Store in a dry place where your lawnmower is
protected from damage.
Environmental Information
Electrolux Outdoor Products are manufactured
under an Environmental Management System
(ISO 14001) using, where practical, components
manufactured in the most environmentally
responsible manner, according to company
procedures, and with the potential for recycling
at the end of the products’ life.
•
Packaging is recyclable and plastic
components have been labelled (where
practical) for categorised recycling.
•
Awareness of the environment must be
considered when disposing of ‘end-of-life’
product.
•
If necessary, contact your local authority for
disposal information.
Service Recommendations
•
Your product is uniquely identified by a silver and black product rating label.
•
We strongly recommend that your product is serviced at least every twelve months, more
often in a professional application.
