Flymo Power Trim 500 X Original Instructions Manual Download Page 2

Carton Contents

IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna UK Ltd. Customer Service Department direct
Telephone : 0844 844 4558  UK

1800 882 350 ROI

Fax : 01325 302530

Safety

General
1. This product is not intended for use by persons (in-

cluding children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or in-
struction concerning the use of the product by a person
responsible for their safety.  Children should be super-
vised to ensure that they do not play with the product.
Local regulations may restrict the age of the operator.

2. Never allow children or people unfamiliar with the   in-

structions to use the machine.

3. Stop using the machine while people, especially chil-

dren, or pets are nearby.

4. Only use the trimmer in the manner and for the func-

tions described in these instructions.

5. Never operate the trimmer when you are tired, ill or

under the influence of alcohol, drugs or medicine.

6. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical
AVOID ACCIDENTAL STARTING.  REMOVE PLUG FROM
MAINS AND KEEP FEET AWAY FROM THE SWITCH

LEVER WHEN:- CLEANING AROUND THE INSIDE OF THE
SAFETY GUARD, REMOVING OR REFITTING SPOOL CAP,
MANUALLY FEEDING OR REPLACING NYLON LINE.
1. It is recommended that you use a Residual Current

Device (R.C.D.) with a tripping current of not more
than 30mA.  Even with a R.C.D. installed 100% safety
cannot be guaranteed and safe working practice must
be followed at all times.  Check your R.C.D . every time
you use it.

2. Before use, examine the cable for signs of damage or

ageing.  If the cable is found to be defective, take the product
to an Authorised Service Centre and have the cable replaced.

3. Do not use the trimmer if the electric cables are damaged or

worn.

4. Immediately disconnect from the mains electricity supply if the

cable is cut, or the insulation is damaged.  Do not touch the
electric cable until the electrical supply has been disconnected.
Do not repair a cut or damaged cable.  Replace it with a new one. 

5. Your extension cable must be uncoiled, coiled cables

can overheat and reduce the efficiency of your trimmer.

6. Keep the cable clear of the cutting area and obstacles at all

times.

WARNING When using the product the safety rules must be followed. For your own safety and that of bystanders
please read these instructions before operating the product. Please keep the instructions safe for later use.

Explanation of Symbols on the product

Warning

Read the user instructions carefully to make
sure you understand all the controls and what
they do.

Keep bystanders away.  Do not operate
whilst people especially children or pets
are in the area.

Wear eye protection

Do not operate in the rain or leave the product
outdoors while it is raining.

Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged.

Warning: The cutting line continues to rotate after the
machine has been switched off.

360º

10m

Switch Handle

Electric Cable with
moulded on plug

Safety-
Guard

Instruction
Manual

Tube

Steady Handle

Trimmer Head

Plant and
Tree Guard

Summary of Contents for Power Trim 500 X









Reviews: