background image

Carton Contents

IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna UK Ltd. Customer Service Department direct
Telephone : 0844 844 4558  UK

1800 882 350  ROI

Fax : 01325 302530

Safety

If not used properly this product can be dangerous!  This product can cause serious injury to the operator
and others, the warnings and safety instructions must be followed to ensure reasonable safety and
efficiency in using this product.  The operator is responsible for following the warning and safety
instructions in this manual and on the product.

Explanation of Symbols on the Hover Vac

Warning

Read the user instructions carefully to make
sure you understand all the controls and
what they do.

Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged.  Keep the cable away from the
plastic cutters.

Keep bystanders away.  Do not operate
whilst people especially children or pets are
in the area.

Do not operate in the rain or leave the
product outdoors while it is raining.

The use of eye protection is recommended
to protect against objects thrown by the
plastic cutters.

General
1.

This product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
the use of the product by a person responsible for their
safety.  Children should be supervised to ensure that they do
not play with the product. Local regulations may restrict the
age of the operator.

2.

Never allow children or people unfamiliar with these
instructions to use the product.

3.

Stop using the machine while people, especially
children, or pets are nearby.

4. Only use the product in the manner and for the

functions described in these instructions.

5. Never operate the product when you are tired, ill or

under the influence of alcohol, drugs or medicine.

6. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical
1. The British Standards Institute recommend the use of a

Residual Current Device (R.C.D.) with a tripping current
of not more than 30mA.  Even with a R.C.D. installed
100% safety cannot be guaranteed and safe working
practice must be followed at all times.  Check your
R.C.D. every time you use it.

2. Before use, examine cable for damage, replace it if

there are signs of damage or ageing.

3. Do not use the product if the electric cables are

damaged or worn. 

4.

Immediately disconnect from the mains electricity

cable clip

cable clip

electric cable

with moulded

on plug

lower handle

fixing pin

instruction

manual

plastic

cutters

bolt

upper handle

start/stop lever

switchbox

washers

nut 

bolt 

handle knob

handle knob

fixing

pin

Summary of Contents for Hover Vac










Reviews: