Flymo Glider Compact 330 VC, Operator'S Manual

Page: 11 / 20

To adjust the cutting height
The cutting height can be adjusted from 12 to 32 mm
in 4 positions.
1 20
1. Turn the adjust knob (20) counterclockwise to
lower the cutting height.
2. Turn the adjust knob (20) clockwise to increase
the cutting height.
To use the mower with the grass box
WARNING!
• Risk of physical injury!
• Cut injury when the blade turns or
the product starts accidentally.
• Wait for the blade to stop, disconnect
the product from the mains and use
gloves before you put / remove the
grass box.
• Do not put your hands in the
discharge opening.
16 12
16 14
1. Open the lid (12).
2. Put the grass box into the product by the handle
(14).
3. Close the lid (12).
4. Make sure that the grass box is securely
connected.
5. Start the product.
The transparent lid (12) shows the filling
level of the grass box.
6. Stop the product when the grass box is filled
completely.
7. Open the lid (12).
8. Remove the grass box of the product by the
handle (14).
9. Empty the grass box.
To use the mower without the grass
box
For larger areas of grass where grass collection is
not required you can use the product without the
grass box. The cut grass drop on the lawn.
1. Open the lid (12).
2. Remove the grass box of the product by the
handle (14).
3. Close the lid (12).
Tips to use the mower
1. Mow twice a week during the growing season.
The lawn will suffer if more than a third of its
length is cut at one time and this may also result
in poor collection.
2.
For the best
results mow the outside edge of the lawn in a
clockwise direction first.
3. Start to mow the edge of the lawn nearest to the
power point.
So the cable is laid out on the lawn you have
already cut.
4.
For best grass
collection always mow in a straight line. Do not
swing the lawnmower from side to side.
5. For the best cutting results mow in straight lines
with an overlap of approximately 8 - 10 cm on
each pass with the mower.
6. Do Not overload the mower.
To mow long thick grass may cause the motor
speed to drop and you will hear a change in the
motor sound. If the motor speed drops you may
overload the mower which may cause damage.
When you mow in long thick grass a first cut with
the cutting height set higher will help reduce the
load. See adjusting the cutting height.
17 - 001 - 11