Flymo EasiSaw 350E, Operator'S Manual

Page: 8 / 28

Contents
Introduction..................................................................... 8
Safety..............................................................................9
Assembly...................................................................... 14
Operation...................................................................... 14
Maintenance................................................................. 19 Troubleshooting............................................................ 23
Transportation, storage and disposal........................... 24
Technical data.............................................................. 24
Accessories.................................................................. 25
Declaration of Conformity............................................. 26
Introduction
Intended use
This product is intended for sawing in wood.
Note:
National regulations can set limit to the
operation of the product.
Product description
Flymo EasiSaw 350E is a mains-supplied chainsaw with
an electric motor.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Product overview
(Fig. 1)
1. Front handle
2. Front hand guard
3. Cap for the chain oil tank
4. Power trigger lockout
5. Rear handle
6. Rear hand guard
7. Power cord
8. Fan housing
9. Power trigger
10. Spiked bumper
11. Inspection gauge for chain oil
12. Drive sprocket cover
13. Chain tensioning knob
14. Bar knob
15. Chain catcher
16. Guide bar
17. Saw chain
18. Bar tip sprocket
19. Transportation cover
20. Operator's manual
Symbols on the product
(Fig. 2) WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
(Fig. 3) Read the operator's manual carefully
and make sure that you understand the
instructions before you use the product.
(Fig. 4)
Use 2 hands when you operate the
product.
(Fig. 5) Wear eye protection and ear protection.
(Fig. 6) Noise emission to the environment label
as per EU (also including New South
Wales Legislation) and UK directives and
regulations. Noise emission data can
be found on the machine label and in
Technical data on page 24 .
(Fig. 7) Remove the power plug from the mains
immediately if the cable is damaged or
cut.
(Fig. 8) Warning! Kickback can occur when the
guide bar tip touches an object. This
causes the guide bar to be thrown in the
direction of the operator. Risk of serious
injury or death.
(Fig. 9) Chain brake, engaged (right). Chain
brake, disengaged (left).
(Fig. 10) Do not expose to rain.
(Fig. 11) This product complies with applicable EC
Directives.
(Fig. 12) This product conforms to the applicable
UK regulations.
(Fig. 13) Class II tool.
8 1810 - 001 -