Page 41
Flymaster GPS M User Manual v. 1.0
Delete Waypoint -
It is possible to delete just a single waypoint on the GPS M. Select
the waypoint to be deleted by pressing either the UP or DOWN cursor buttons. Once the
waypoint is highlighted, selecting Delete Waypoint will remove the waypoint from the GPS
M memory. If a waypoint is in use int the Route the delete function will be disabled, to
delete the Waypoint it must firstly be removed from the Route.
Delete all waypoints -
All of the waypoints can be removed from the GPS M . Delete
all the waypoints will also delete the Route. When selecting this option the GPS M will
prompt to ensure that this is exactly what is intended.
Go to point -
Selecting the Go To Point will force navigation to the selected waypoint.
Once selected (by pressing the ENTER button), the instrument will jump to the flight screen
automatically and navigate to that point. When returning to the Waypoints/Route will cancel
the active Go To.
The Go To function will override the Route navigation, although the GPS M will remember
where it was in the Route, so when the Go To is cancelled (as described above) it will
resume the route at the point it was at before the Go To was activated.
Edit route -
The GPS M will only store one Route. This is deliberate to prevent flying
an incorrect Route. A Route can be edited by selecting the Edit Route option of the WAM.
Selecting the Edit Route option will highlight the first Route point in the TL area.
Load waypoints from file –
The GPS M can load a waypoints list directly from a
waypoints file stored in the SD card. The file must be present in the root directory of the
SD card in .WPT (Geo format) ONLY.
