Page 40
Flymaster GPS M User Manual v. 1.0
Waypoints/Route
Add a waypoint to the Route -
select the waypoint that is to be added by pressing
either the UP or DOWN buttons until the desired waypoint is highlighted. Pressing the
ENTER button will add the point onto the TL on the right, at this moment the task point
options for the newly added waypoint will appear in the DO area, allowing to set several
aspects of the task point (these can also be edited later)
Insert New WP -
This menu allows the user to add a new waypoint to the waypoint list.
If the GPS is fix, then the co-ordinates and altitude used for the waypoint are based on the
current position.
Edit waypoint -
Entering this menu allows the properties of the selected waypoint to be
changed. The name of the waypoint can be changed, along with the elevation, latitude,
longitude and if the waypoint is to be designated as a landing field. To change any of the
properties of the waypoint, first select the waypoint. Pressing ENTER pulls up the menu
allowing the waypoint to be edited. Pressing the ENTER button again will show a cursor,
indicating the character to edited. Characters can be changed using UP and Down cursor
buttons. Pressing the ENTER button will move the cursor to the next character.
