1.5 Resetting the GPS SD
The reset procedure allows the pilot to restart the GPS SD in the unlikely event that it freezes, or stops
responding (if this ever occur please report it to our support email). To reset the GPS SD push S1 (Menu)
key and the S4 (Down arrow) key, simultaneously, for at least two seconds. The display will go blank and
after will return in Flight mode.
Note: Resetting the GPS SD will also reset ight data, e.g. task status.
1.6 Setting the Volume
The GPS SD sound volume can be adjust using one FS Key, or trough the Vario Accoustics option of the
Settings Menu (see Section
4.7.3
). The GPS SD has six dierent sound levels, plus no sound. The current
volume level can be seen using the sound element (see Section
3.1.2
for more details).
Pressing the dened FS Key will scroll up the sound level until the maximum value. Pressing more will
mute the sound before start scrolling again starting from the minimum value.
Note: Changing the volume using an FS key is only valid for the current ight, and will not
override the volume level setting. Every time the instrument is turned on, if the sound is
muted, an alarm is generated in order to notify the pilot.
Note: When the instrument is turned on the sound can be muted despite the volume level
settings. This occurs due to the Auto silent mode is activated (see Section
4.7.4
for more
details)
1.7 Flight Start and Recording
Most of the GPS SD features are only available after the Flight Start. This procedure is taken in order to
avoid wrong calculations due to missing data. Flight starts when all of there 3 conditions are met:
1. GPS 3d x is established;
2. Speed goes over the congured Start Speed (default value is 8km/h)
3. Average vario is greater than +-0.15m/s
6
Summary of Contents for GPS SD
Page 1: ...User manual Document version 1 0...
Page 46: ...Figure 4 35 GPS Reset 45...
