Flymaster GPS LS, User Manual

Page: 5 / 28

Flight page
2. Display layout
10
12
13
14
16
1
3
4
5
7
2
1
6
8
9
11
15
Battery level - This indicates the battery level of your instrument.
GPS status - This indicates the quality of the GPS signal. When blinking is searching for
GPS signal, when fixed with 2D or 3D mode means that the instrument is ready to fly.
Máx. climb rate - This value indicates the maximum climb rate achieved during the
current flight.
Current Glide ratio - This field indicates your current glide ratio.
Analog Vario- This indicates graphically, your current vario ratio.
Vario - This value indicates the instant climb/sink rate, numerically.
Ground Speed - This value indicates your ground speed.
Max. sink rate -
This value indicates the maximum sink rate achieved during the current
flight.
Wind speed - This value indicates the calculated wind speed.
Wind direction - This rotational arrow indicates where the wind comes from. Your
position is on the center of the wheel.
Distance from Take Off - This value indicates your straight line distance from T.O.
Heading - This value indicates your heading in degrees.
Thermal ball - This rotational ball indicates the position relative to you of the last thermal.
Your position is on the center of the wheel.
Distance to thermal - This value indicates the distance from the last thermal.
Altimeter - This value indicates your current altitude.
Volume level - This indicates the volume level of the GPS LS speaker (Mute, Low,
Medium, High).
Clock/Flight Time - This value indicates the current time. Also it shows the current flight
duration.