Advanced Web Configuration
Flyingvoice Network Technology Co., Ltd. 54
Field Name
Description
Provision Enable
Enable provision or not.
Resync on Reset
Enable resync after restart or not.
Resync Random
Delay(sec)
Set the maximum delay for the request of synchronization file. The
default is 40.
Resync Periodic(sec)
If the last resync was failure, The ATA will retry resync after the
”
Resync
Error Retry Delay
”
time, default is 3600s.
Resync Error Retry
Delay(rec)
Set the periodic time for resync, default is 3600s.
Forced Resync
Delay(sec)
If it
’
s time to resync, but the device is busy now, in this case, the ATA
will wait for a period time, the longest is
”
Forced Resync Delay
”
,
default is 14400s, when the time over, the ATA will forced to resync.
Resync After
Upgrade
Enable firmware upgrade after resync or not. The default is Enabled.
Resync From SIP
Enable/Disable resync from SIP.
Option 66
It is used for In-house provision mode only. When use TFTP with
option 66 to realize provisioning, user must input right configuration
file name in the webpage. When disable Option 66, this parameter has
no effect.
Config File Name
It is used for In-house provision mode only. When use TFTP with
option 66 to realize provisioning, user must input right configuration
file name in the webpage. When disable Option 66, this parameter has
no effect.
