Basic Features
Flyingvoice Network Technology Co., Ltd. 10
Basic Features
You can use the ATA to make a place and answer calls, ignore incoming calls, transfer a call to someone
else, conduct a conference call and perform other basic call features.
Topics
ATA initialization
After the ATA is powered on, the following steps will be performed:
1. Please make sure that the network cable connected to the adapter can access the Internet
normally, and the adapter is in DHCP mode by default.
2. Please connect the LAN port of the device to the computer. After the connection is successful,
the computer will obtain the IP of 192.168.1.x and can access the Internet normally .
Note: If the ATA cannot obtain the network configuration through the DHCP server, please
perform the basic network settings on page 11.
ATA Status
You can check the ATA status through the adapter web interface. The status information of the adapter
includes:
1.
Network status (currently active uplink status, etc.)
2.
IPv4 address length is 32 bits
3.
Device information (product name, hardware version, firmware version, product serial number, MAC
address)
4.
Account information (registered information for SIP account)
