Flyingvoice FTA5111, User Manual

Page: 19 / 83

Basic Features
Flyingvoice Network Technology Co., Ltd. 17
Procedure
1. Navigate to the FXO/Call Route web page.
2. Add call route: call is from SIP trunk1, need forward to FXO1, please refer to call route 1 like picture.
3. Please note: when setting call route from SIP trunk to FXO, change number is not mandatory, but
the call from FXO to SIP trunk, you must input change number, this means the call from FXO only
could forward to change number.
4. Press button in the bottom of the web page to save changes.
5. Press button in the bottom of the web page to make setting effective.
6. Navigate to Status page check register status.
Configuring FXS
SIP Accounts
The device support 2 FXS ports to make SIP (Session Initiation Protocol) calls. Before registering, the
device user should have a SIP account configured by the system administrator or provider. See the
section below for more information.
Configuring SIP via the Web Management Interface