User Manual
17
operation! When you set several different vlans for WAN port,
user can use this option to define the LAN port’s service, usually
please bind Internet VLAN to LAN port.
6.2.2
LAN
In this page, user can set the IP address of the device and set DHCP server. DHCP server is a kind
of network function, FTA1101 can supply DHCP service for the network which is linked with
FTA1101’s LAN if you enable the DHCP server for FTA1101’s LAN.(By default this is enabled).
WEB Interface
Settings Introduction
1)
Local IP Address and Local Subnet Mask
Set the LAN port IP address and subnet
mask. By default the address is 192.168.1.1
and subnet mask is 255.255.255.0.
2) Local DHCP Server and DHCP Start/End
Address
If or not enable the DHCP service, and set
the start and end address of the DHCP server.
By default DHCP server is enabled.
3) DNS Mode and Primary/Secondary DNS
Set the DNS mode and address for the DHCP
server. If set Auto, the device will get the
address from the upstream route, if set
Manual, user need enter the primary and
secondary DNS.
4) Client Lease Time
Set client lease time.
5) DNS Proxy
If or not enable DNS proxy.
User can use the default settings.
By default, the LAN port works in NAT mode, if user wants to make it work in Bridge mode,
please go to Network-->WAN page to set.
