Flying tent 000011, Instruction Manual

Page: 7 / 10

SETUP AND USE
7
Setup as a tent
F G
5
1. Take the flying tent out of the pack sack
7
.
2. Undo the safety strap and the tent floor clips
12
. Connect the tent floor clips with the outer
tent clips
16
.
3. Spread the tent out on the floor and tension it by securing it with the tent pegs
5
on both
ends of the tent ( Fig. F and G ).
4. You can also use the two prefitted guy lines
20
to secure the tent.
Removing the outer tent / rain roof
Converting the hammock tent to a hammock with mosquito screen
H
19
I
The following steps can only be performed as described if you have already set up the flying
tent as a hammock tent or as a tent on the floor.
1. Undo the zipper
10
in the middle of the tent.
2. Take the hook and loop fasteners
19
off of the tent poles
8
( Fig. H ).
3. Undo the tent floor clips
12
on the ends of the tent poles.
4. Take the outer tent clasps
15
out of the rear loops
21
on the quick release unit.
5. Remove the outer tent
11
( Fig. I ).
You can also remove the outer tent once the tent has been set up on the ground. The steps are
identical.
Pay attention to the colour codes on the clips when reattaching the outer tent.
20