www.flyingmachines.cz FLYING MACHINES s.r.o. [email protected]
5. Performance
5.1 Introduction
5.2 Speed
5.3 Rate of climb
and loss of height during stall
5.4 Take off and landing distance
5.5 Flying range
5.6 Gliding ratio
5.7 Cruise
5.8 Fuel consumption
6. Airplane Handling, Service & Maintenance Information
6.1 Anchoring an airplane
6.2 Manipulation with an airplane
6.3 Rigging and de-rigging
6.3.1 De-rigging
6.3.2 Rigging
6.4 Washing and cleaning of an airplane
6.5 Filling the fuel
6.6 Placards and their locations
6.7 Stepping up on an airplane
7. Service life of an airplane and maintenance cycles
7.1 Service life of an airplane
7.2 Maintenance
7.2.1 Lubrication
7.2.2 Disassembly of the nose wheel
7.2.3 Disassembly of the main wheel
7.2.4 Tire repairs
7.2.5 Electrical installation
7.2.5.1 Electrical installation inspection
7.2.6 Spark plugs
7.2.7 Special tools
7.2.8 Minor repairs
7.2.9 Changing the fuel filter in the engine area
7.2.10 Propeller maintenance
7.2.11 Jacking points on an airplane
7.3 Introductory inspection
7.4 Periodic inspection after every 50 hours
7.5 Periodic inspection after every 100 hours
7.6 Periodic inspection after every 200 hours
7.7 Periodic inspection after every 300 hours
7.8 Placards and their locations
8. Repairs
8.1 Replacement of screws
8.2 Repairs of rivet joints
8.3 Controls repairs
8.4 Airframe repairs
8.5 Fuel system repairs
8.6 Engine repairs
8.7 Electrical system and electrical appliances repairs
Flight Manual Page 3 of 40
