Current meter
cytrynka PDB has default on board current sensor with amperage up to 90A.
There are two ways to get current value:
•
soldering wire to pad on PDB and directly to OSD. In this case is not possible to
log current value
•
using FC (default connection PDB->CB). In this case user must activate feature
in cleanflight configurator:
on image above in “Scale the output...” is “400” but must be 815!
or via CLI using commands:
12
WARNING:
Current meter can work with amperage up to 90A but PDB
is designed to carry current
only up to 60A
.
feature CURRENT_METER
current_meter_type = 1
current_meter_scale = 815
current_meter_offset = 0
