Bend:
To bend your cut rods into the desired shapes, use the
Rod Bending Wrench
on your smART Workbench.
Depending on the part you are making, your
Rod Bending Wrench
may call for either the
Small Diameter
Circle
(“RADIUS 10”) or the
Larger Diameter Circle
(“RADIUS 20”).
Diameter Circles:
To change the
Diameter Circle
of your
Rod Bending Wrench
, follow these simple steps:
1) Pull out the
Large Pin
of the
Rod Bending Wrench
.
2) Pull out the
Small Pin
of the
Rod Bending Wrench
.
3) Insert the
Diameter Circle
you wish to use (“RADIUS 10” or “RADIUS 20”).
4) Replace the
Small Pin
:
a. In the second hole for “RADIUS 20”.
b. In the first hole for “RADIUS 10”.
5) Replace the
Large Pin
of the
Rod Bending Wrench
and insert it into the
smART Workbench
.
Now you’re ready to use the
Rod Bending Wrench
:
1) Take the rod you wish to bend and thread it between the
Large Pin
and the
Small Pin
of the
Rod Bending Wrench
.
2) Depending on which
Diameter Circle
you are using, the rod will either rest in the
Main Rod
Channel
(“RADIUS 10”) or against the outside wall of the
Main Rod Channel
(“RADIUS 20”).
-3-
RA
D
IU
S 1
0
RA
D
IU
S 2
0
Rod Bending Wrench (RADIUS 20)
Large Pin
Small Pin (in second hole for “RADIUS 20”)
Rod Bending Wrench (RADIUS 10)
Large Pin
Small Pin (in second hole for “RADIUS 10”)
RAD
IU
S
20
Rod
Rod Bending Wrench (RADIUS 20)
RAD
IU
S
10
Rod
Rod Bending Wrench (RADIUS 10)
BEND:
BEND:
