4
Using an allen key, pull the mounting
bracket of the placid arm out of the flowline
support arm and remove the cord from the
bracket. Make sure it comes out precisely
through the hole in the placid arm.
Secure the cord properly with the cord lock
and insert the cord bundle into the cup.
Insert the cord into the cup. Then, attach
the cord lock to the cord.
Attach the camera hook to the flowline
support bar, as shown in the picture.
Cord Assembly into Flowline Master
Note:
The camera hook will be below the
flowline support bar while using the camera,
and it will be up when attaching the placid, as
shown in the image.
