2
Join section-1 of support bar to section-2
with simple push-fit technique.
Remove the side knobs and join section-2
with section-3 and again tighten the side
knobs.
Flowline Master Setup
Wear Support Jacket and tighten the
buckles provided at chest and waist. Then
adjust until you find it comfortable.
Section-1
Section-2
Side knob of
Section-2
Section-3
Attach one end of Safety Belt with Support
Jacket, Make a knot with rest of the belt as
shown in the image. You can attach this belt
at
many
areas according
to
your
requirement.
Loosen the knob of hook and attach the
camera with it. Tighten the knob to ensure
slip free connection.
For Safety Belt
Attach other end with your camera, for
more safety & protection.
