2
Attach Central Post to the Base Platform by
means of threaded stud in center. Rotate the
Base Platform to properly secure with Central
post.
Loosen allen bolts at bottom of Camera Plate,
align its holes with top of Central Post &
re-tighten them securing the plate to post.
Remove Head Plate by unscrewing four side
knobs to mount Quick Release Adapter.
Stabilizer
Setup
Then attach Head Plate to stabilizer with
appropriate fore & aft positioning and
tighten all four side knobs, as shown. Further
fine tuning will probably be required.
Loosen allen bolt at bottom of Quick Release
Adapter and attach it to Head Plate.
Open the lever and remove Quick Release
Plate from Adapter. Then attach it with your
camera with the help of screw driver.
