3
Bearing Maintenance
If after some period of time the bearings stop running smoothly as when new, you can oil it with light
lubricating oil. We recommend using only a few drops, anything more than a little will end up dripping
from the bearing and onto the rest of your Comfort Arm. Be sure to keep the oil away from your camera,
and clean up any over-spill when done.
Cleaning
Do not use solvents or harsh cleaners of any kind on Comfort Arm & Vest. If the unit becomes dirty, use
only a cloth or sponge with water and a very mild detergent to gently rub the unit clean. Rinse well.
Storage
If you are going to store Flycam Comfort Arm & Vest for a long period of time, then we recommend
storing it up-right in a dry or low-to-normal humidity area.
If you are unable to find an environment like this, then we suggest you store the unit in an airtight plastic
container or bag. Keeping the unit upright helps to lessen stress on the system.
Maintenance
Determine which end fits into bottom of your
handle, insert adapter post into yoke, replace
retaining screws and tighten securely.
YOUR FLYCAM COMFORT ARM & VEST
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
