Omnia57-80 ROTOR
-
Installation and User Manual,
Safety Instructions and Warning Booklet
FLYBOX
Rev. 2.0
®
21
Instrument settings
4.4.1 ROTOR Submenu
know how many pulses per revolution it delivers.
Default = 1
Min = 1
Max = 200
Take off:
set the ROTOR RPM required to start the flight timer.
The flight timer starts automatically when the ROTOR’s RPM
meets or exceeds this parameter for 30 seconds.
Range:1~700, default=280.
Filter:
increase the number if the reading is affected by
noise on the input signal, decrease the value if the reading
is delayed related to the input signal.
Default = 1, Min = 1 (faster), Max = 10 (slower)
Back:
confirm to go back
to previous menu.
Exit:
confirm to go
directly to the main
screen.
Pulse per rev:
enter the
pulse per revolution of
your Rotor. Check the
documentation of your
aircraft manufactuter to
Summary of Contents for Omnia57 ROTOR
Page 4: ...Examples of available screens ...
Page 52: ......