ASSEMBLY
FOAM BUMPER ASSEMBLY
1
4
5
6
7
1
2
8
9
2
3
Start with foam bumper
supplied in package.
Align plastic clasp on foam
bumper with four clasp holes on
bumper car to secure into place.
Continue to work your way
around bumper car edges
securing foam bumper into
place.
Start with flag pole and position
above flag pole hole near back
of seat.
Snap flag pole into place by
pressing down to secure.
As you work your way around,
the top and bottom lip of foam
bumper should cover the
molded bottom edges of
bumper car.
Finish the foam bumper
installation when you get
back to the plastic clasp
you started with.
Snap plastic clasp into place
in the four clasp mold holes
to secure.
Slowly start pulling foam
bumper down around bumper
car edges to position into place.
Pull out bumper car from
package and position to
back view.
Place foam bumper over
backside of car as positioned
above.
FLAG ASSEMBLY
BOTTOM CLASP
MOLD HOLES
SECURED CLASP
FLYBAR_BUMPER_CAR_OWNERS_MANUAL_V2.indd 5
FLYBAR_BUMPER_CAR_OWNERS_MANUAL_V2.indd 5
5/14/21 1:18 PM
5/14/21 1:18 PM
