7.2 Calibrating the Elios 2 RAD sensor module
7.2.1 Connect the detector module to a windows PC
Use the provided USB adapter to connect the sensor module to your PC.
In RiumConfig, click on the “Calibration” tab on the bar to the left, then select it from the drop-down menu
in the top left.
E2RAD is compatible with Elios 2-RAD type of detectors, which are named as follows in RiumConfig:
Low level = X
If the Elios 2 RAD sensor module is not connected to your PC at this point, then you will get this message
This message means:
“No sensor, verify the connection and try again”
. This can be due to a faulty
connection, or due to the drivers not being installed correctly. Be sure that the FTDI drivers have been
installed.
If the sensor module is successfully connected you will get a message saying “Confirmation de connexion”,
click ‘Valider’ to continue.
ELIOS 2 RAD USER MANUAL
Page 12 of 16
