TRIKE-FLASH OWNER’S MANUAL REL . 2.0
___________________________________________________________________________
©
Copyright by
FLY
Products
s.r.l.
Page
11
Assemble the two upper cage frames and insert
the special lower cage frame.
Lock all velcro strap , true lower frame in line
with engine base frame, hold the frame in
position and drill with a 6,5 mm point the engine
frame trough the preset hole in the cage frame.
Lock it with the
issued plastic wing
nut, inserting the
ovalized support
in this way
.
Fasten the upper plastic wing bolt
This terminate the engine mountig SETUP that is required ONLY for an eventally change of the
engine model with different holes position.
Continue from here the standard assembly of the TRIKE-FLASH:
This complete the trike assembly, check your work before go on.
TANDEM AND SINGLE VERSION
Transform the TRIKE-FLASH from single version to double version is very simple, just invert the
attachment positions from carabiners to harness and then mount the second harness in the preset
attachment positions
