OWNER'S MANUAL POWER JET Rev. 1.0
©
Copyright by
FLY
Products
s.r.l.
Page
7
For correct assembly proceed in the following order:
Step 1
Place the PJ125’s central frame (the engine unit) on a flat surface.
Step 2
- Support rods.
Plug all six cage support
rods into their bushings
on the central frame
(engine),
take attention to put longest
on the top.
Fig. 5 - Support rods
Step 3
- Assembling upper
frames
Make sure that the cage netting
is in front of the cage support
rods as shows in the pics.
Place the upper frame quarters
onto the upper support rods and
rotate the frames until plug in
the inserts in the related holes.
Lock the velcro strap as shown.
Fig. 6 - Upper mount
Fig. 7 - Velcro strap lock
Step 4 & 5
- Assembling sides
frames
Place the side frames onto the
side support rods and plug in
the inserts in the related holes.
Lock the side velcro straps.
Fig. 8 - Mount side frames.
