manualshive.com logo in svg

Fly Products POWER JET, Owner'S Manual

The Fly Products POWER JET Owner's Manual is available for free download on our website. This comprehensive manual provides all the information you need to operate and maintain your POWER JET product. Download your copy today to ensure you get the most out of your flying experience.

Share
Download
background image

OWNER'S MANUAL POWER JET                                                                                                             Rev. 1.0 

©

Copyright by

FLY 

Products

  s.r.l.                                                                                   

Page 

10

Fig. 13  Mounting the bottom 
straps 

Fig. 14 Close-up of mounting 
straps

Finally, fasten two top mounting straps around the top tube of the frame (Fig. 15)

.

  Fasten these belts 

securely as in Fig. 14, or, in case of the model with the eyelet bolts, hook the two triangular carabiners 
to the eyelets. 

Fig.15 Mounting the top harness straps 

This completes the harness mounting.  Inspect your work to ensure that all is OK. 

Summary of Contents for POWER JET




































Reviews:

No comments

Related manuals for POWER JET

Brands by name

Popular brands

Load more brands