“FLASH 100” OWNER’S MANUAL REL . 2.0
___________________________________________________________________________
©
Copyright by
FLY
Products
s.r.l.
Page
7
Step 3 : Assembling right hand side outer frame
Insert the two upper-side pins into their seating.
Mount the left hand side outer frame.
Insert the two lower–side pins of the frame into their seating.
Mount the other lower-side outer frame repeating the same operation.
Step 4 : Assembling lower outer frame
Insert the two lower pins of the frame into their seating.
Mount the other lower outer frame repeating the same operation.
Step 5 : Attach the velcro straps.
Once the frame is properly connected, it is best to immediately attach the velcro straps.
Fig. 8 – Attach the upper
Fig. 9 – Attach the sides
Fig. 10 – Attach the lowers
NOTE!
When finished, check all velcro straps Attachments.
Step 6 : Net stretching.
Final operation is the net stretching and locking. Thread the stretching string ends as shown in
fig.11, thread the hook-end into the noose-end, stretch the string and hook back to the "flying" loop.
Fig. 11 – Lower noose loop
This completes the assembly of the external cage.
