ECLIPSE
–RIDER USER MANUAL__ _____________ ___ VER. 1.1
Pag. 6
FRAME ASSEMBLY
The engagement system used "clip
button" or snap button, greatly simplifies
the assembly procedure.
For a correct use, keeping the button
pressed, engage the two parts and rotate
them slightly until the clicking button
comes out of the hole.
For disassembly, just keep the button
pressed down until doing a slight pull
and rotation until the hole is released
from the button thus allowing the
separation of the two parts.
The supports of the cage to be mounted on the central
frame are of THREE different lengths as shown in the
figure:
A
: LONG –
up
B
: AVERAGE –
center
C
: SHORT –
low
The other removable part:
D
It is the starter support
for housing the engine starting pulley.
N O T I C E
JUST THE FIRST ASSEMBLY, AS THE NET IS NEW,
IT IS NORMAL TO EXERCISE A GREATER FORCE
THAN USUAL IN ASSEMBLING THE PARTS.
YOU CAN PROCEED WITHOUT FEAR OF DAMAGE.
