7
Installing the projector- Fig. 3
The projector can be installed on the floor resting
by means of brackets
, on a truss or on the ceiling or wall.
WARNING:with the exception of when the projector is positioned on the floor, the safety
rop
e must be fitted.
This must be securely fixed to the support structure of the projector and then connected to the fixing point at
the centre of the base.
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
When suspending the fixture, ensure that the supporting structure and all hardware used
can
hold at least 10 times the weight of all the devices they support.
INSTALLATION
AND
CONNECTING
Our company is fully operational in any mounting position, hanging upside-down, side
mounted, or set on a flat level surface, etc. Be sure this fixture is kept at least 0.5m
(
about 1.6feet) away from any flammable materials (decoration etc.).
When clamp mounting; always use and install the supplied safety cable as an added
safety measure to prevent accidental damage in the event of a clamp failure. See the
