LIGHT SKY
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
www.lightsky.com.cn
www.lightsky-china.com
9
8
. POWER SUPPLY AND SIGNAL CONNECTION
1. Power supply
Use the professional plug to connect the projector and main power
supply. Please pay attention to the voltage, frequency the same as the
mentioned on the projector. Suggest each light has separately switched of
the power supply so that could turn on or turn off each projector
desultorily.
2. Signal connection
Please use the round 3-pin XLR plugs &sockets offered by menu
facture to connect the first projector's output to the second projector'
input and connect the second projector's output to the third device's
input. And in the same way for the rest, eventually connect the last
device's output, all the devices are together as the following figure.
The devices’ control signal output or input by using the 3-pin XLR pug
and socket. If need to long then the communication cable, please make
sure the both side of 3-pin plug is one to one. (one to one, two to two,
three to three). Otherwise, the communication cable will be interrupted.
