8
© Flexsteel Industries, Inc. 11/19
5. Plug auxiliary cable (AUX) into AUX port on transmitter or
plug optical cable (OPT) into SPDIF/TX port on transmitter.
6. Connect opposite end of either cable to TV/audio receiver output.
7. Flip TX/RX switch to TX.
Press/hold power button on Bluetooth transmitter for 3 seconds to initiate
Bluetooth pairing.
A blue light will flash slowly while searching for connection.
If there is no connection established after 10 seconds, blue light will flash quickly.
A solid blue light will be illuminated once connection is established.
PAIR A 2
ND
FLX CHAIR TO
SMART TV OR AUDIO RECEIVER
1. Follow applicable instructions for pairing one chair to
smart TV/audio receiver to establish Bluetooth connection.
2. Move FLX chair #2 near the one that’s already connected
to your TV/audio receiver.
3. Plug FLX chair into power outlet and power on.
MODE will automatically set to Bluetooth.
4. If connection does not happen automatically:
a. Press MODE button. A solid red light will illuminate to confirm Bluetooth
has been reset, and FLX chair is ready to connect to new device.
b. Press MODE button. A blue light will flash, and FLX chair will attempt to pair
with handheld device. The light will stop flashing, and a chime will sound when
connection is established.
