installation
PAGE 4 of 4
Install-View | 2020-03
All rights reserved. © Fluxwerx Illumination 2020 604.549.9379 | fl uxwerx.com
Due to continuous product improvements, specifi cations and dimensions are subject to change without notice. Certain options have
limited compatibility with some other product selections. Consult www.fl uxwerx.com for most current technical information.
For surface mount: Close the low voltage wiring lid, install the cover
assembly into place, and tighten the sleeve.
1. Leave the protective bag and care labels on the fi xtures until
construction and furniture are complete.
2. Fixture can be operated as normal with the bag on.
3. Tear bag at perforation, do not use knives or tools.
12
REMOVE BAG LATER
10C
SURFACE APPLICATIONS:
INSTALL COVER ASSEMBLY
1. Stretch the cord up and reset the cord clips to hold the cord inline with
the aircraft cable.
2. Apply power to the driver circuit(s).
11
SECURE CORD + APPLY POWER
view suspended
