Do not expose the FLX13000 to temperatures over +140°F (+60°C) or under -4°F
(-20°C) as this could decrease the performance of your battery.
Do not expose the FLX13000 to temperatures over +140°F (60°C) as this could
create a safety hazard.
Always disconnect the jump start cables from the FLX13000 after use and store sepa-
rately.
Do not crush, puncture, or penetrate the FLX13000 as this poses a safety risk.
In the extremely unlikely event that any corrosive liquid seeps from your FLX13000,
discontinue use. If any corrosive liquid comes in contact with your skin or eyes, imme-
diately wash with running water and consult a doctor.
Your FLX13000 must be disposed of properly when it is no longer able to be used.
You need to recycle your lithium-ion battery at a local facility.
If there are any problems with the product or a malfunction occurs during usage,
•
•
•
•
•
•
•
FAQ's
Do I need to read my vehicle user's manual before using the FLX13000 Jump Starter to
jump start my vehicle?
We recommend that you read your vehicle user's manual before jump starting your
vehicle as other precautionary steps may be specified by the vehicle's manufacturer.
Before jump starting my vehicle, what steps do I need to take?
Please refer to the User’s Manual and/or Quick Start Guide. You can also find these
documents online at www.fluxamp.com.
What happens if my FLX13000 clamps accidentally touch?
Please read all instructions and safety warnings before Jump starting your vehicle.
Connecting the metal teeth of the clamps would create a short circuit, which could result
in a spark and possibly damage your clamps.
What happens if I accidentally connect the FLX13000 clamps to the wrong battery
terminals?
Please read all instructions and safety warnings before Jump starting your vehicle.
Connecting the clamps to the wrong terminals could cause a reverse polarity and possi-
bly damage your clamps.
What car can FLX13000 start?
FLX13000 Jump Starters can be used on gas and diesel engines as follows:
Up to 3.5 liter gas engines/2.6 liter diesel engines*
*Engine size is approximate; power requirement will vary for each vehicle.
NOTE: Extreme cold temperatures affect battery performance. If you operate in these
conditions for any length of time, consider the next largest FLUXAMP Jump Starter.
How do I turn off my FLX13000 Jump Starter?
The FLX13000 Jump Starter will power off automatically when not in use.
How do I turn on the flashlight on my FLX13000 Jump Starter?
Press the on/off switch for 3 seconds: it shows white LED, white LED as flashlight.
There are 3 modes of LED light that appear in the following order:
1st click: Strobe 2nd click: SOS
3rd click: OFF
How long does it take to fully charge the FLX13000 Jump Starter?
Approximately 4 hours
Q:
A:
Q:
A:
Q:
A:
Q:
A:
Q:
A:
Q:
A:
Q:
A:
Q:
A:
