Properly identify the vehicle battery's positive and negative terminals before con-
necting the clamps.
When using the clamps, DO NOT allow the metal teeth of the clamps to touch one
another. This will cause a short circuit which could cause a spark and may compro-
mise your clamps.
When using the clamps, DO NOT connect the RED clamp to the vehicle battery's
negative (-) terminal, or the BLACK clamp to the vehicle battery's positive (+) termi-
nal. This will cause a reversal of polarity and could compromise your clamps.
When connecting the FLX13000 clamps to the battery terminals, please ensure that
you have a secure connection. The copper teeth of the clamp should be securely
attached to the metallic portion of the terminal. The better the connection, the easier
it will be to start your vehicle.
NOTE: When adjusting the clamps please be sure to first disconnect the FLX13000.
This will prevent the occurrence of minor sparks.
General Guidance: FLX13000 Model to Engine Size
FLX13000 Jump Starters can be used on gas and diesel engines as follows:
Up to 3.5 liter gas engines/2.6 liter diesel engines*
*Engine size is approximate; power requirement will vary for each vehicle.
NOTE: Extreme cold temperatures affect battery performance. If you operate in
•
•
•
•
•
•
Product Service or Missing Parts for Your FLX13000
Any questions about operating or using this new FLX13000 Jump Starter or if parts are
missing, please contact FLUXAMP first at www.fluxamp.com
Should this product require factory service or replacements please contact local
distributors directly. This will ensure the fastest turn-around time.
Important Safety Information
WARNING: Read all instructions and warnings prior to using this product. Improper
use of this product may result in product damage, excess heat, toxic fumes, fire or
explosion, for which FLUXAMP is not responsible.
Always read all instructions carefully before using your FLX13000 Jump Starter.
Do not submerge your FLX13000 Jump Starter in water, or expose it to rain or mois-
ture.
Never open or disassemble your FLX13000 Jump Starter as it will void your warran-
ty.
Do not expose your FLX13000 Jump Starter to fire, intense heat, or flammable
liquids.
Only charge the product at temperatures between -4°F (-20°C) to 140°F (60°C)
Keep away from and out of reach of children.
Do not insert foreign objects into ANY inputs or outputs.
Do not use this product where there are flammable fumes, gases, or dust present.
Do not allow the metal teeth of the red clamp to touch the metal teeth of the black
clamp when connected to the FLX13000.
Do not connect the black clamp to the vehicle battery's positive (+) terminal when
connected to the FLX13000. Do not connect the red clamp to the vehicle battery's
•
•
•
•
•
•
•
•
•
•
•