Flurida FDFD10502 User Instructions Download Page 12

12 

 

i n f o @ f l u r i d a a p p l i a n c e s . c o m  

 

 

 

TROUBLESHOOTINGS 

 

Chart 
 

Complaint 

Possible Causes

Response 

Unit is not working 
and display is not lit

 

a.  Power cord is unplugged. 
b.  No power at outlet. 
c.  Power cord is broken. 
d.  Control PCB is defective or 

with wiring problems. 

e.  Display PCB is defective or 

with wiring problems.

a.  Plug in the power cord. 
b.  Check for outlet and breaker or fuse. 
c.  Call for service. 
d.  Call for service. 

 

e.  Call for service. 

Icemaker is not 
producing ice 

 

a.  There is ice in the ice mould, 

but the icemaker is turned off. 

b.  There is ice in the ice mould, 

but ice cubes are jammed. 

c.  There is no water in the ice 

mould and the water fill tube 
freezes. 

d.  There is no water in the ice 

mould and the water filters are 
clogged. 

e.  There is no water in the ice 

mould and the icemaker water 
valve is defective or with wiring 
problems. 

f.  There is no water in the ice 

mould and the icemaker is 
defective. 

g.  There is ice in the ice mould, 

but the icemaker is not 
working. 

h.  There is water in the ice mould 

but the cooling system is not 
working. 

a.  Turn the icemaker on. 

 

b.  Clear the ice cubes. 

 

c.  Unplug the unit and remove the ice bin 

then wait until fill tube is clear. 
   

d.  Bypass the water filters and check if ice 

quality improves. 
 

e.  Call for service. 
 
 
 
f.  Call for service. 
 
 
g.  Call for service. 
 
 
h.  Call for service. 

 

Icemaker is not 
producing enough ice 
or ice cubes are small

 

a.  The freezer door is not closed 

properly. 

b.  The ice chute flap is not closed 

properly 

c.  Air is trapped in the icemaker 

water line and the ice mould is 
not filled with sufficient water. 

d.  The icemaker water valve is 

not working properly. 

e.  The icemaker is not working 

properly. 

f.  The cooling system is not 

working properly. 

a.  Check for the door seal and door 

opening. 

b.  Check for the flap. 

 

c.  Release cups of water from the water 

release drain. 
 

d.  Call for services. 

 

e.  Call for service. 

 

f.  Call for service. 
 

Ice cubes are hollow 

a.  The icemaker thermostat is 

defective. 

b.  The icemaker water valve is 

defective. 

c.  The cooling system is not 

working properly. 

a.  Call for service. 
 
b.  Call for service. 

 

c.  Call for service. 

Ice cubes are frozen 
together in the ice bin 

a.  If ice cubes haven’t been used 

for a long period of time, they 
may freeze together. 

a.  Pull out the ice bin and shake it or 

remove the large clumps of ice cubes. 
 

Summary of Contents for FDFD10502
















Reviews: