11
2 4 4 1 2 M a i n S t . S u i t e 1 0 5 , C a r s o n , C A 9 0 7 4 5
How to insert or disconnect a tube or plug
1.
Remove the lock clip first.
2.
To install, insert a tube or plug until it is engaged;
To disconnect, press the release ring down and pull out a tube or plug.
3.
Install the lock clip.
Water filtration system application
NOTE
A municipal water supply or other potable water with water pressure between
20 and 120 psig is required to operate this unit. Drain is not required.
Remove the plug of the filtered water inlet connector (8), which is
located at the back of the unit. Insert the free end of the filtered water
line into the connector (8) until it stops.
