l
Click on <Edit> under “Email configuration display” to open the input mask for the
Sender data
.
l
Enter a
Name
in the “Sender Name” field.
The name can be chosen arbitrarily, but it should have a reference to the monitored system.
l
Enter an
Email address
in the “Email Address” field.
This can also be chosen arbitrarily, but it must contain an existing domain (address part after the @ sign) as
some servers check this during transmission.
l
To conclude, click on <Save Settings> and confirm the following message with <OK>.
Note!
Pay attention to the correct spelling of the email address:
NO
spaces, special characters, umlauts. Other-
wise, transmission will not take place.
Email account
The emails are usually sent via or directly to an SMTP server that contains the recipient's mailbox.
l
Click on <Edit> under "account configuration" to edit an existing account or click on <Add New> to create a
new account. The input mask for the email account appears:
Settings for the email account
Account ID
: Sequential number for the account, e.g. "2".
Account type
: Set the
SMTP
here.
Account Authorization
: Set the authentication method on the SMTP server here.
Server URL
: Enter the absolute IP address of the SMTP server or the domain name here.
When using a domain name, at least one accessible DNS server is to be specified, otherwise the name can-
not be resolved. Enter the DNS server under
Homepage / <System> / <Network Configuration>
. This is
not absolutely necessary if you enter an absolute IP address.
23
Edition: 10.2018
Commissioning