3-27
To delete an event/ comment in the route
• Press the F key in the event editor to open the bottom event or
comment window.
• Select the event or comment o be deleted.
• Press the MENU key and click on 'Delete'.
Signal sensitivity on analog output/headphones
The analog output is activated and configured in the device setup
(see p. 2-28). To adjust the sensitivity of the analog output, proceed
as follows:
• Press the MENU key in the measurement screen.
• Select ‘Analog Out’ / ‘<Sensitivity>’ and set the desired
sensitivity.
For 2-channel measurements, you can also select the channel
whose signal is to be output on the analog output (see below).
Analog signal output
- Controlling signal sensitivity
- Selecting a measurement channel
(2-channel measurement)
Options
Summary of Contents for VIB 5.310
Page 1: ...Data Collector Vibration Analyzer VIBXPERT II Users Manual ...
Page 9: ...1 8 Empty page ...
Page 51: ...2 38 Empty page ...