3-10
MENU functions in the tree / list view
• Press the MENU key in the tree / list view (see below):
Skip / Unskip
If a machine is not in operation during a route, you can skip all
measurement tasks planned at this machine. The measurement
tasks that are associated with the highlighted route element and
were not measured are left out. This procedure is reversible.
Event/Comment
Enter an event or comment (see p. 3-26).
Delete result
Delete the measurement result for the selected element and all
sub-elements. This procedure cannot be reversed!
Set unmeasured
Change the status of the associated measurement task to 'not
measured'. All existing results are retained.
Reset reference rpm
The reference rpm of the machine train or the production line
speed is reset and can be measured again.
Break down multitask
All the multi-measurement tasks that are assigned to the
highlighted element are broken down into the individual
measurement tasks. This procedure is irreversible!
Break near location
The optimized coordination of the measurement tasks
for neighboring measurement locations is disabled. The
measurements no longer take place simultaneously.
Reset multiplexer
If the connection to the multiplexer is interrupted during the
measurement or between measurements, the addressing has to
be rest manually (see p. 3-43).
Measurement - Route
Left:
Menu functions
in the Tree view
Right:
Info dialog
For mechanically coded
VIBCODE-locations, the code ring pat-
tern can be shown.
Summary of Contents for VIB 5.310
Page 1: ...Data Collector Vibration Analyzer VIBXPERT II Users Manual ...
Page 9: ...1 8 Empty page ...
Page 51: ...2 38 Empty page ...
