![background image](http://html1.mh-extra.com/html/grosvenor/fp-gt4/fp-gt4_installation-manual_2269887001.webp)
Version 1.1 January 2020
GT4 Front Panel
Installation Guide
FP-GT4
General
The GT4 Data Collection Terminal
is a modular design which can be
customised by adding additional modules
to the basic terminal front panel. For a
minimum system the following items are
necessary in addition to the GT4 Front
Panel
Back Housing
Power Supply
Additional modules can be added for
further functionality
Card Reader Module (Proximity or
Swipe)
Biometric Module
Battery Backup Module
External Reader Module
External I/O Relay Module
Power Loading - 220mA @12V Power IN
Real Time Clock Coin Cell
Maintains the RTC during power off
situations. Under normal operating
conditions the coin cell will have a
service life of up to 10 years.
Biometric Reader Connector
For Suprema Fingerprint Reader Module
Reader Module Connector
Reader Modules Include
HID Prox
Feig Prox
Generic Prox 5V
Generic Prox 12V
Mag Swipe
Barcode Swipe
Biometric Reader Position
For Suprema Fingerprint Reader Module
Slot for Swipe Reader
Unit is supplied with slot filler bar
Remove for Swipe readers
Fit for Proximity readers
Power over Ethernet (PoE)
Module Position
Optional module enables terminal to be
powered via the Ethernet cable using an
IEEE802.3af or IEEE802.3at Ethernet
switch or mid-span injector
USB Connector
USB 2 x 4
Supports Flash memory stick
USB Fingerprint Readers
Other devices subject to drivers
Power IN Connector (2.1mm)
12V DC External PSU (centre
positive)
11-13V @ 1A max (refer to Power
Loading for current calculation)
Ethernet Connector
10/100baseT
Full duplex
Supports PoE (when module fitted)
Auxiliary Power Connector
For connection of Power Option
Modules including
Battery Backup Module
Mounting
points for
Reader
Module
Front cover
fixing screw
RECOVERY Switch
Press the Recovery button for Factory
Reset.
RESET Switch
Press to initiate hardware reset,
Terminal will reboot