The main section of this hardware guide is written assuming that you are installing the full-
duplex TAP-100-2X16 with a network appliance as the nerve center of a network analyzing system.
Further, it is assumed that switch configuration will take place at a central location using Fluke
Networks switch control software for Windows 9x/NT/2000/XP following the procedure outlined in
the Fluke Networks MANagents software guide.
AUDIENCE
This hardware guide is written for the person who must install and connect a TAP-100-2X16.
It is assumed you are familiar with Windows9x/NT/2000/XP, know how networks operate,
and have operating knowledge of using network appliances in network analyzing configurations.
2
Preface
