background image

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for two years from 

the date of purchase. This warranty does not cover fuses, disposable batteries, or damage 

from accident, neglect, misuse, alteration, contamination, or abnormal conditions of 

operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s 

behalf. To obtain service during the warranty period, contact your nearest Fluke authorized 

service center to obtain return authorization information, then send the product to that 

Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS 

FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS 

NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL 

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states 

or countries do not allow the exclusion or limitation of an implied warranty or of incidental or 

consequential damages, this limitation of liability may not apply to you.

11/99

Fluke Corporation
P.O. Box 9090
Everett, WA  98206-9090

U.S.A

PO Box 1186
5602 BD Eindhoven,
The Netherlands

Summary of Contents for ST120







Reviews: