Fluke MultiFiber Pro, User Manual

Page: 16 / 68

MultiFiber Pro Optical Power Meter and Fiber Test Kits
Users Manual
6
Display Features
GEU03.EPS
Figure 3. Meter Display Features

Modes for the meter and settings for tests.
To select the
POWER , SET REF , or LOSS measurement
modes, press

. To change settings for measurements
or to view records, hold down

for 2.5 seconds, then
use

and

to make selections.

POWER : Use this mode to measure optical power. See
"How to Measure Optical Power" on page 12.

SET REF : Use this mode to set the reference for loss
measurements. See "Set the Reference for Loss
Measurements" on page 17.

LOSS : Use this mode to measure loss. See "How to
Measure Loss" on page 16.

LOSS LIMIT : Select this to set the limit for loss
measurements. See "Set the Limit for Loss
Measurements" on page 16.

VIEW RECORD : Use this mode to see and delete saved
results. See "View Records" on page 25.
 
: There is a problem with a measurement, or you
tried to save a measurement, but the memory is full.
OK : All measurements are satisfactory, or the meter
saved the results.