MicroScanner Pro
Users Manual
8
M
ICRO
S
CANNER
P
RO
Tests
This section describes the tests that you can conduct
with
M
ICRO
S
CANNER
P
RO
.
Wiremap
The
Wiremap
function tests twisted-pair cabling for
proper wiring. Your cabling configuration is checked
for shield continuity, opens, shorts, crossed pairs, split
pairs, and reversed pairs.
Test Results are displayed as a numeric representation,
where the upper line of fixed digits shows the detected
wires at the M
ICRO
S
CANNER
P
RO
jack, and the lower line
of digits indicates the actual wiring. This function
requires the use of the Wiremap Adapter at the far
end.
To conduct a Wiremap test:
1.
Connect the cable to be tested to the
MAIN
jack
(identified on the unit right above the modular 8
jack).
2.
To display the Wiremap screen, press the
MODE
key until the word
WIREMAP
appears on the
screen.