Auto Shutoff
9
Wiremap diagram. For opens, the number of segments
lit for the wire pair indicates the approximate distance
to the fault. The rightmost segments indicate the
shield. See pages 12 through 15.
The
Indicates a fault or high voltage on the cable.
SPLIT
appears when the fault is a split pair. See page 15.
Auto Shutoff
The tester turns off after 10 minutes if no keys are pressed
and nothing changes at the tester’s connectors.
Note
Auto shutoff is disabled in toner and demonstration
modes.
Changing the Length Units
1
Hold down
and
while turning on the tester.
2
Press
to switch between meters and feet.
3
Turn the tester off then on to return to testing mode.