MicroNetBlink
TM
/ MicroProbe
TM
Battery
M
ICRO
N
ET
B
LINK
requires a 9 Volt Alkaline battery.
M
ICRO
P
ROBE
requires a 9 Volt Alkaline battery.
The low Battery LED will light up when a low
battery condition is detected.
Using the units with a low battery may effect the
test accuracy.
If the units are stored for more than one month,
the battery should be removed.
High Voltage Protection
Do not touch the tip of M
ICRO
P
ROBE
to the active
circuit contact or line.
Remember to adjust the volume rotary to reach
an ideal volume level.
Do not expose the units to extreme humidity or
direct sunlight.
Do not open the units or attempt to repair in case
of malfunction. Please send it back to your
distributor for repair or replacement.
M
ICRO
N
ET
B
LINK
is designed to withstand input
voltage conditions that arise from normal
telephony applications such as 48 VDC at less
than 80 ma or 24 VAC used to power many
keysets. Tests cannot be performed when hazard
conditions exist on the inputs.
Summary of Contents for MicroNetBlink Kit
Page 1: ...M I C R O T O O L S MICRONETBLINK KIT...
Page 3: ......
Page 63: ...MicroNetBlink TM MicroProbe TM...
Page 66: ...M I C R O T O O L S...
