LinkRunner AT 1000/2000 Network Auto-Tester
Users Manual
6
The Home Screen
G
H
A
C
D
B
E
F
I
ffy15.eps
Figure 2. The Home Screen
Shows the battery status. When the battery
charge is low, the icon blinks. Connect the ac
adapter to charge the battery and to make
sure the tester continues to operate.
Shows that the ac adapter is connected.
Shows that the USB interface is connected.
Switch:
Shows the advertised and actual link, PoE
measurements, nearest switch with its name, type, IP
address, port, slot, and VLAN information.
Cable
: When the cable is connected un-terminated or is
connected to a WireView
TM
Office Locator, it shows cable
information or wire mapping information. This can also
be used to locate a cable with the optional IntelliTone
TM
probe.
The name of the tester profile. A profile contains the
tester configuration settings. The default name is
“Untitled”. The name shows an asterisk to the right of
the name if you have changed a setting on the tester
since you loaded or saved the profile.
AutoTest
: Use Autotest to Ping and connect to selected
targets. Up to 10 targets can be entered as a URL or IPv4/
IPv6 address along with the optional port number.
When no port is specified, a Ping is performed. When
the port is specified, a TCP SYN/ACK is performed. This is
also referred to as a TCP Connectivity test.
Tools
lets you manage files and settings.
Link established indicator.
Displays the link speed and duplex mode.
Summary of Contents for LinkRunner AT 1000
Page 4: ......
